Frequently Asked Questions

See our Frequently Asked Questions to help you find the right system for your business.

There are three key things to consider when purchasing Steel Storage Racking.

1. Is it compliant to the current Australian Standards? Make sure you clarify this with the supplier.

2. Is it a major brand that has back up materials easily available in your area?

3. Are the materials Imported or Australian made? Finally if you are looking for independant, un-bias advise please dont hesitate to contact us.

The easiest way to determine the brand of your existing racking is to look at the hole patterns in the frame uprights. Below is a list of the most common types of pallet racking found in Australia.

Pallet Racking Accessories

There are a wide range of products available and the picture below lists out many of the options:

Pallet Racking Components

Let’s assume that you use standard fully loaded pallets with dimensions of 1200mm x 1200mm x 1300mm (Diagram 3.1). Note this can vary and some pallets can be longer, wider, shorter or taller. In addition, you leave a recommended minimum clearance of 150mm between the top of a pallet and the bottom of the beam above it (Diagram 3.2).

Using these assumptions then beams (Diagram 3.3) on a double pallet bay should be placed at:

  • 1550mm for a 1 level pallet rack (4 pallets)
  • 3100mm for a 2 level pallet rack (6 pallets)
  • 4650mm for a 3 level pallet rack (8 pallets)

Pallet Levels Diagram

Pallet racking is rated on both upright frames and on beams. Assuming that each of your pallets are carrying 1000Kgs (Diagram 4.1) of product and you have 3 levels of 2 pallets on each shelf then your beams need to be rated to 2000Kgs and your upright frames need to be rated to 6000Kgs.

Here’s an illustration to show how rack rating works:

Rack Rating Diagram

As a general rule, rack spacing depends on the length of your forklift. PRQ recommends adding 500mm to the length of your forklift (from the rear of the chassis to the tip of your tynes) as a minimum forklift turning circle.

Rack-Spacing

Three factors for the right racking height:

  1. Warehouse storage density required. If you need a lot of products in your warehouse then definitely utilise its full height. If you don’t have a high density requirement then going too high with your racking is negative. The time and skill required in forklifting to high racks is not required when you can simply utilise lower racking.
  2. Forklift reach. Make sure your forklift tynes reach the height of your racking and your forklift is rated to lift pallet loads to that height.
  3. Height of your warehouse. It is recommended to leave a clearance of 1 metre between the top pallet and you warehouse ceiling

Forklift Diagram

To remain compliant, all operational pallet racking must be independently inspected annually.

Get a free quote now from one of our experienced team members

BOOK AN APPOINTMENT